Connecting to an Embroidery Machine

1. Open a design you would like to transfer to the embroidery machine
2. Select Utilities>Transmit to Machine

A box like the one shown at the right will appear

3. The currently selected device is normally Barudan Elite as indicated at the top of the Window.
4. If the Barudan Elite is not the selected machine, or if you are not connecting to a Barudan Elite machine, select the Add-remove Machines button as indicated at the right to change the machine type.
5. This is all you normally have to do to connect to the machine, Click the Start Button from the Right side of the screen, The design will disappear from the screen and the button will change to Stop. This means the software is waiting for you to start retrieving the data.

Go to your embroidery machine and download the design as described in your embroidery machine users guide

The Select Machines dialog is divided into 2 parts. The Column on the left lists all of the different machines that the software currently supports. The Column on the right indicates the currently selected machine or machines.

To remove an item from the right, click on the item you want to remove, then click the arrow pointing to the left.

To add a machine to the right, click on the machine type you want to add and then click the arrow pointing  to the right

When you are finished, click the OK button

The previous window will re-appear.Continue on with step 5 above

Note that the Active Device is now set to  whichever machine type you selected as indicated at the top of the window.

Common Errors

•  When the Start Button is pressed, the design immediately starts sending but the machine does not retrieve the design.
•  The Software seems to be correct, But the machine does not retrieve the design
•  When the Start Button is pressed, and error box appears that says “Connection Interrupted”

In All of these cases, the likely solution is that the cable is connected to a port that the software has not identified.

Click the Options Button in the first window and select a different port from the pop up window that appears.

If you cannot move your mouse after pressing the Start button, Press the ESC key to cancel the transfer and release your mouse.