The E-Stitch is used primarily to hold down an appliqué, but it can also be used to produce other effects such as grass.
|
|
|
Embroidery Settings For E-Stitch
|
Enable Step:
|
Normally the E-stitch is created as a single stitch. However, if the column is wide, the e-stitch will be very long. Enable Step allows this to be sewn as step satin stitches. The E stitch will not normally be created at densities less than 10.
|
Step Length:
|
The length of the step in the e-stitch if Enable Step is activated
|
Random Step:
|
Enables a random type of stitch placement for the e-stitch
|
Random Percent:
|
Determines to amount of randomization for the stitch points
|
Set E every:
|
|
|
Determines how close together the E stitches will be placed. This control allows the E stitch to be placed on every 2nd, 3rd etc.. stitch. When using this feature, the intermediate stitches will be eliminated. The same effect can be achieved by changing the density.
|
Change Side:
|
Swaps the side of the column the E Stitch is applied to.
|
|
|
|
Copyright © 2011, Compucon
Created with the Personal Edition of HelpNDoc: Full featured Help generator
